-
UHMWPE/PA/PTFE Powder Sintered Cartridge Replacement of Ultrafiltration Membranes
Material: UHMWPE/PA/PTFE powder. Self-cleaning method: back-blowing/back-flushing. Raw liquid goes through the cartridge from outside to inside, impurities are trapped on the outer surface. When cleaning, introduce compressed air or liquid to blow or flush the impurities from inside to outside. Cartridge can be reused and is a cost-effective alternative to ultrafiltration membranes. Notably, it can be applied to the process prior to reverse osmosis filtration.
Filtration rating: 0.1-100 μm. Filtration area: 5-100 m2. Suitable for: conditions with high solids content, a large amount of filter cake and a high requirement for filter cake dryness.
-
VSRF Automatic Back-flushing Mesh Filter
Filter element: Stainless steel wedge mesh. Self-cleaning method: back-flushing. When impurities accumulate on the inner surface of filter mesh (differential pressure or time reaches the set value), PLC sends a signal to drive the rotary back-flushing pipe. When the pipes are directly opposite the meshes, filtrate back-flushes the meshes one by one or in groups, and sewage system is automatically turned on. The filter has received 4 patents for its unique discharge system, mechanical seal, discharge device and structure that prevents the transmission shaft from jumping up.
Filtration rating: 25-5000 μm. Filtration area: 1.334-29.359 m2. Applies to: water with oily sludge-like / soft and viscous / high-content / hair and fiber impurities.
-
VMF Automatic Tubular Back-flushing Mesh Filter
Filter element: Stainless steel wedge mesh. Self-cleaning method: back-flushing. When impurities collect on the outer surface of the filter mesh (either when the differential pressure or time reaches the set value), the PLC system sends a signal to initiate a backflush process using the filtrate. During the backflush process, the filter continues its filtering operations. The filter has obtained 3 patents for its filter mesh reinforcement support ring, applicability to high pressure conditions and novel system design.
Filtration rating: 30-5000 μm. Flow rate: 0-1000 m3/h. Applies to: low-viscosity liquids and continuous filtration.
-
VWYB Horizontal Pressure Leaf Filter
Filter element: stainless steel 316Lmulti-layer Dutch weave wire mesh leaf. Self-cleaning method: blowing and vibrating. When impurities accumulate on the outer surface of filter leaf (pressure reaches the set value), operate the hydraulic station to blow the filter cake. When the filter cake is dry, vibrate the leaf to shake off the cake.
Filtration rating: 100-2000 mesh. Filtration area: 5-200 m2. Applies to: filtration requiring large filtration area, automatic control and dry cake recovery.
-
VCTF Pleated/Melt Blown/String Wound/Stainless Steel Cartridge Filter
Filter element: Pleated (PP/PES/PTFE) / melt blown (PP) / string wound (PP/absorbent cotton) / stainless steel (mesh pleated/powder sintered) cartridge. A cartridge filter is a tubular filtration device. Within a housing, cartridges are enclosed, serving the purpose of extracting undesired particles, pollutants, and chemicals from liquids. As the liquid or solvent requiring filtration moves through the housing, it comes into contact with the cartridges and passes through the filter element.
Filtration rating: 0.05-200 μm. Cartridge length: 10, 20, 30, 40, 60 inches. Cartridge quantity: 1-200 pcs. Applies to: various liquids containing trace number of impurities.
-
VCTF-L High Flow Cartridge Filter
Filter element: high flow pp pleated cartridge. Structure: vertical/horizontal. High Flow Cartridge Filter is designed to handle high volume liquid while effectively removing contaminants. It has a larger surface area than conventional filters for higher flow rates. This type of filter is typically used in industrial applications where large volumes of fluid need to be processed quickly. High flow design ensures minimal pressure drop and provides excellent filtration efficiency. It provides a cost-effective solution by reducing the frequency of filter changes and saving operating and maintenance costs.
Filtration rating: 0.5-100 μm. Cartridge length: 40, 60 inches. Cartridge quantity: 1-20 pcs. Applies to: high-throughput working conditions.
-
VBTF-L/S Single Bag Filter System
Filter element: PP/PE/Nylon/Non-woven fabric/PTFE/PVDF filter bag. Type: simplex/duplex. VBTF Single Bag Filter consists of a housing, a filter bag and a perforated mesh basket supporting the bag. It is suitable for the precision filtration of liquids. It can remove trace number of fine impurities. Compared with the cartridge filter, it has a large flow rate, fast operation, and economical consumables. It is equipped with a variety of high-performance filter bags to meet most precision filtration requirements.
Filtration rating: 0.5-3000 μm. Filtration area: 0.1, 0.25, 0.5 m2. Applies to: precision filtration of water and viscous liquids.
-
VBTF-Q Multi Bag Filter System
Filter element: PP/PE/Nylon/Non-woven fabric/PTFE/PVDF filter bag. Type: simplex/duplex. VBTF Multi Bag Filter consists of a housing, filter bags and perforated mesh baskets supporting the bags. It is suitable for the precision filtration of liquids, eliminating trace number of impurities. Bag filter surpasses cartridge filter in terms of its large flow rate, prompt operation, and economical consumables. It is accompanied by a diverse assortment of high-performance filter bags catering to most precision filtration requirements.
Filtration rating: 0.5-3000 μm. Filtration area: 1-12 m2. Applies to: precision filtration of water and viscous liquids.
-
VSTF Simplex/Duplex Mesh Basket Filter Strainer
Filter element: SS304/SS316L/dual-phase steel 2205/ dual-phase steel 2207 composite/perforated/wedge mesh filter basket. Type: simplex/duplex; T-type/Y-type. VSTF Basket Filter consists of a housing and a mesh basket. It is an industrial filtration equipment used (at the inlet or suction) for protection of pumps, heat exchangers, valves and other pipeline products. It is a cost-effective equipment for large particle removal: reusable, long service life, improved efficiency, and reduced risk of system downtime. Design standard: ASME/ANSI/EN1092-1/DIN/JIS. Other standards possible upon request.
Filtration rating: 1-8000 μm. Filtration area: 0.01-30 m2. Applies to: Petrochemical, fine chemicals, water treatment, food & beverage, pharmaceutical, papermaking, automotive industry, etc.
-
VSLS Hydrocyclone Centrifugal Solid Liquid Separator
VSLS Centrifugal Hydrocyclone uses the centrifugal force generated by liquid rotation to separate precipitable particles. It is widely used in solid-liquid separation. It can separate solid impurities as small as 5μm. Its separation efficiency depends on the particle density and liquid viscosity. It operates without moving parts and does not require cleaning or replacement of filter elements, thus can be used for many years without maintenance. Design standard: ASME/ANSI/EN1092-1/DIN/JIS. Other standards possible upon request.
Separation efficiency: 98%, for large specific gravity particles greater than 40μm. Flow rate: 1-5000 m3/h. Applies to: Water treatment, paper, petrochemical, metal processing, biochemical-pharmaceutical industry, etc.
-
VIR Powerful Magnetic Separator Iron Remover
Magnetic Separator effectively removes rust, iron filings, and other ferrous impurities to improve product purity and protect equipment from damage. It uses advanced technology and materials, including a super-strong NdFeB magnetic rod with a surface magnetic field strength exceeding 12,000 Gauss. The product has obtained 2 patents for its ability to comprehensively removes pipeline ferrous contaminants and quickly removes impurities. Design standard: ASME/ANSI/EN1092-1/DIN/JIS. Other standards possible upon request.
Magnetic field strength peak: 12,000 Gauss. Applies to: Liquids containing trace amounts of iron particles.
